Electro Voice Speaker System FRi 122 85 User Manual

FRi-122/85  
12-InchTwo-WayFull-Range  
Passive or Active  
Speaker System  
Key Features  
Compact, EasilyArrayableCabinets  
RMDTM –Ring Mode Decoupled  
2" Pure Titanium HF Compression Driver  
Switchable Passive or Active Operation  
Available in Black, White or Unfinished  
Cloth Coverable Grills  
Paintable Enclosure  
12 Threaded Suspension Points  
General Description  
Technical Specifications  
Freq. Response1 (-3 dB): 50 Hz - 15 kHz  
Freq. Range1 (-10 dB): 40 Hz - 16 kHz  
Max Calculated SPL: 128 dB  
The Fri series of Professional Fixed Install Speakers deliver  
a broad range of performance options including multiple horn  
patterns, easily switchable passive or bi-amp operation, and  
EV’s World renown transducer technology for response that  
is smooth and linear. The Fri-122/85 is an economical and  
flexible solution for the most demanding installations.  
Offering superior performance, the Fri-122/85 is equipped  
with 12-recessed shoulder bolted suspension points for  
easy flying and each cabinet includes 4, 3/8" forged eye-  
bolts for convenience. All Fri speakers have a vertical box  
height of 28" allowing neat, concise and visually appealing  
arrays. The structural integrity of the Fri cabinets allow for  
vertical arrays up to 3 boxes in height. Fri speakers are  
specifically recommended for demanding, cost conscious  
installations such as Houses of Worship, Nightclubs, Live  
Music Venues, and mutli-use spaces such as Gymnasiums  
and Auditoriums. All Fri speakers employ EV’s exclusive  
Ring Mode Decoupling (RMDTM) and high performance,  
World Class EV transducer design and technology to  
ensure maximum speech intelligibility and musical clarity.  
Additionally, all Fri systems are available in Black, White  
and Unfinished options.  
Horizontal Coverage: 80°  
Vertical Coverage: 55°  
LF Power Handling: 300W Continuous, 1200W Peak  
HF Power Handling: 40W Continuous, 160W Peak  
Sensitivity: 97 dB (1W/1m)  
LF Transducer: DL12BFH 12" (300mm) Driver, 8 ohms  
HF Transducer: DH2t 2" (51mm) exit Compression  
Driver, 8 ohms  
Connectors: Two barrier strips  
Enclosure Material: 7-ply cross-grain-laminated plywood  
Grille: Powder Coated perforated 16GA steel  
Environmental Spec: IEC 529 IP24  
Dim (H x W x D): 27.92" x 15.83" x 17.54"  
(711 x 401 x 445 mm)  
Net Weight (each): 60 lbs (27.3 kg)  
Shipping Weight: 72 lbs (32.7 kg)  
1 Half Space Measurement.  
 
Engineering Data Sheet  
Vertical 1/3 Octave Polars:  
Horizontal 1/3 Octave Polars:  
 
Dimension Drawings:  
Top View  
Front View  
Side View  
Architectural & Engineering Specs:  
The two-way full range loudspeaker system shall incorporate a 12” LF transducer and a 2” (51mm) voice coil HF compression  
driver. The LF driver shall be mounted in a vented enclosure tuned for optimum low-frequency response. The HF driver shall be  
loaded on a constant-directivity horn with a nominal coverage pattern of 80° (h) x 55° (v). An internal passive filter network shall  
provide acoustical crossover and system equalization. Input panel shall easily change from passive to biamp operation via  
internal connector. System frequency response shall vary no more than +/-3 dB from 50 Hz to 15 kHz measured on axis. The  
loudspeaker shall produce a sound pressure level (SPL) of 97 dB on axis at 1 meter. It shall handle 300 watts of amplifier power  
long term (EIA Standard), and shall have a nominal impedance of 8 ohms. The loudspeaker enclosure shall be trapezoidal in  
shape. It shall be constructed of 7-ply cross-grain-laminated plywood and shall employ extensive internal bracing. It shall be  
finished in aliphatic polyurethane. Input connectors shall be two at 2 terminal barrier strips. A total of twelve 3/8-16 threaded  
mounting/suspension points shall be provided, (three each on top and bottom, two per side, two on rear). The front of the  
loudspeaker shall be cloth coverable with a powder-coated perforated 16 GA steel grille.  
The two-way loudspeaker shall be the Electro-Voice model FRi-122/85.  
FRi-122/85Part Numbers  
1152-3392 - Unfinished  
1152-3384 - Black  
1152-3385 - White  
U.S.A. and Canada only. For customer orders, contact Customer Service at:  
800/392-3497 Fax: 800/955-6831  
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:  
+ 49 9421-706 0 Fax: + 49 9421-706 265  
Other International locations. For customer orders, contact Customer Service at:  
+ 1 952 884-4051 Fax: + 1 952 736-4212  
For warranty repair or service information, contact the Service Repair department at:  
12000 Portland Avenue South, Burnsville, MN 55337  
Phone: 952/884-4051, Fax: 952/884-0043  
800/685-2606  
© Telex Communications, Inc. 2/2003  
For technical assistance, contact Technical Support at: 866/78AUDIO  
Part Number 38110-135 Rev. A  
Specifications subject to change without notice.  
 

Eclipse Fujitsu Ten Stereo Amplifier DA7232 User Manual
Everpure Water System EV9272 19 User Manual
Extron electronic Speaker SI 3CT LP User Manual
Fellowes Air Cleaner AP 230H User Manual
Fellowes Laptop Docking Station 8034801 User Manual
Fisher Price Baby Swing H0795 User Manual
Fujitsu Printer FTP 621MCL301 User Manual
GE Air Conditioner ASV14AK User Manual
GE Heat Pump AZ85H18EAC User Manual
Goodman Mfg Furnace GMS8 33 3 8 GAS FURNACE UNITS User Manual